Suzhou Xing Yi Machinery Co.Ltd.
Address: Le Yu town of Zhangjiagang City
Chairman: Shi Hezhong
Tel: 0512-58522516 58653980
Hand machine: 013606229802
Zip code: 215622
The letter box:email@example.com
Company address: www.pupillas.com
[型号 sg800, 型号 sg1000, 型号 SG1200, 型号 sg1250]
Product characteristics and uses:
According to the separation principle of SG series centrifuge is divided into filtration and subsidence in two forms (this description applies to filter type centrifuge), feeding and discharging gap type. Centrifuge at high speed (charging speed), start charging, material feeding pipe, a distributing pipe to cloth wheel, get enough centrifugal force and thrown to the drum wall in the cloth wheel, under the action of centrifugal force through the filter will filter out the liquid, the liquid (mother liquor) to a liquid collecting tank chassis discharge tube, when the cake weight (or volume) to the machine rated loading weight (or volume), close the inlet valve, centrifuge speed to the rated speed, the material to further separation, such as material needs washing, washing valve open, washing the filter cake, and the washing liquid is filtered out when the separation the requirements, low speed centrifuge, scraper device according to the prescribed procedures for scraping, material discharging hole through the drum from the chassis hopper fall to the receiving plate or on the conveyor belt, to complete a work cycle.
The centrifuge for a suspension of small particles (more than or equal to 0.01 mm) separation off the liquid, can be widely used in chemical, pharmaceutical, metallurgy, food, and so on industries. It has the advantages of automatic centrifuge, cylinder seal can prevent some basic toxic materials, strong corrosion leakage wounding, high safety factor. Applicable to high viscosity, strong hydrophilicity, difficult to separate containing fineness granular or fibrous material suspension separation; can also be used in the fraction of a particulate and fibrous, flake is loose or slightly sticky crystalline solid material separation.
The structure and principle:
Motor driven rotating drum, adjust the speed to medium speed, material from the upper part of the join drum by cloth uniform spreading to the drum wall, rose to high speed, under the action of centrifugal force, the liquid passes through the filter cloth and the filter drum wall outlet, solid-phase interception in the drum, stay drum down to low, rotating scraper will be solid from the drum wall scraped from the bottom of the centrifuge discharge.
According to the separation of the different requirements, we design the corresponding type for the customer to choose, so customers when ordering, of the following to make confirmation: Material: material contact parts and materials can be stainless steel, titanium alloy, carbon steel or rubber lining, plastic lining etc..
Drive mode: General Motors, flameproof asynchronous motor, electromagnetic adjustable speed motor or frequency control etc..
Note: the above technical parameters in product specification shall prevail.